Elan M100 AutoEurope Shifter Modification

Previous Page Page 3 Next Page

With the Shifter out just a bit, remove the Eclip and the cable on the right. Remember we are leaving the cables in the car.

Using 2 wrenches, remove the cable on the left.

There are 2 bolts holding th shifter assembly to the carrier.

Remove the front bolt.

Remove the back bolt.

The shifter assembly should come out, takes a little wiggiling.

Here it is. Send this assembly to AutoEurope for the conversion.

Here is the shifter on its return.

It is quite a bit shorter and has a new bend to it.